 |
|
|
|
|
Product Details:
Payment & Shipping Terms:
|
| Application: | Injection Mold | Size: | Standard |
|---|---|---|---|
| Standard: | Sankyo | Type: | Adjusting Type |
| Material: | Steel With Hardness | Shaping Mode: | Die Casting |
| High Light: | Spherical Guide Bushing Set,Inclined Pin Guide Bushing Set,Right Handed Guide Bushing Set |
||
Spherical Guide Bushing Set For Inclined Pin Standard Type MTGL (Left handed) MTGR(Right handed)
Sankyo Standard Oil-Free Slide Units For Loose Core -Standard/Fixed Type- (Part Numbers)
Features of Oil-free Slide Units for Loose Core
● Refer to the above table for dimensions of the inclined pin's edge cutout and screw size (PM). The counterbore on the inclined pin holder is made in a size that accommodates for a socket head cap screw with a spring washer.
● The unit can be mounted on an ejector plate in two ways :(1)Screwing into the ejector plate, or (2)Screwing into the unit. For (2) use a socket head cap screw that corresponds to BM in the Bolt hole dimensions table. For (1) select a rank below the corresponding BM (i.e., M6 screw when BM is M8).
● Prior to mounting, apply * grease to the unit in order to protect it from wear during initial running-in.
● If the stroke is long, it is recommended that you use a bushing that supports the inclined pin.
| L | W | T | H | Ha | B | Mounting Holes | Dowel Pin Hole | Catalog No. | d | ||||
| Ma | P | h | e | X | Y | ||||||||
| 44 | 28 | 17 | 9 | 8 | 14 | 32 | 20 | 28 | 8 | ||||
| 46 | 30 | 20 | 11 | 9 | 16 | M5 | 34 | 6 | 5 | 22 | 28 | 10 | |
| 50 | 32 | 22 | 12 | 10 | 18 | 36 | 22 | 30 | MTGL | 12 | |||
| 58 | 45 | 29 | 16 | 13 | 25 | M6 | 45 | 6 | 30 | 35 | 16 | ||
| 65 | 50 | 33 | 18 | 15 | 28 | 52 | 7 | 35 | 40 | MTGR | 20 | ||
| 78 | 57 | 38 | 21 | 17 | 33 | 62 | 40 | 50 | 25 | ||||
| 86 | 65 | 43 | 24 | 19 | 37 | M8 | 70 | 9 | 8 | 48 | 55 | 30 | |
Contact Person: bearing
